Cuvette Holders / Cuvette Holder Multipurpose
Sarspec CH-MP is a flexible cuvette holder as it’s small, portable and a complete solution for Absorbance / Transmittance and Fluorescence measurements.
• Built for 10 mm pathlength cuvettes
• Absorbance, Fluorescence and Raman measurements
• 12.7 mm collimating lens with adjustable SMA connector
• Flexibility – 4 entry/exit ports each one with filter slots
• Optional signal enhancing mirrors
• Optional direct attach
The 12.7 mm collimating lenses with adjustable SMA connector allow the illumination of larger sample area and collection of more light, making it the best solution for low light measurements.
This cuvette holder is very flexible since it has four ports with M18 threads allowing the user to choose where to connect the collimating lens and optional signal enhancing mirrors (image on the left). On every port there are slots for slide filters (image on the right) that can be easily coupled for light rejection.
The Cuvette Holder can be ordered with a direct attach option (image on the center) to increase significantly the sensitivity in Fluorescence measurements. This option connects the cuvette holder directly to the light source maximizing light intensity on the sample.
The multipurpose cuvette holder MPCH from Sarspec can be used for Absorbance or Fluorescence measurements or both:
|Absorbance Mode||Fluorescence Mode||Absorbance and Fluorescence|
|Applications||Absorbance, Transmittance, Fluorescence, Raman|
|Wavelength range||180-2000+ nm|
|Fiber connection||SMA 905 (adjustable position)|
|Collimating lenses||12.7 UV Fused Silica f = 25 mm|
|Number of ports||4 (0º, 90º, 180º, 270º)|
|Filter slot||4 (max. size filter Ø 12.7 x 3 mm)|
|Dimensions||100 mm x 100 mm x 62 mm (with cover)|
|Cuvette Holder Multipurpose||CH-MP|
|Direct Attach for CH-MP||CH-MP-DA|
|Signal enhancing mirrors (set of 2)||CH-MP-EM|